Angled valve stems

All non racing related discussion

Angled valve stems

Postby sweetr6 » Wed Jan 25, 2012 4:02 pm

Listen up fools! We can get these for $16/set if I order 10 or more. I'm getting 2 sets, anyone willing to go in on this?
Image
sweetr6
Crew Chief
 
Posts: 142
Joined: Fri Dec 24, 2010 10:44 pm
Location: Hell Pisshole Tx.

Re: Angled valve stems

Postby blendedfamily » Wed Jan 25, 2012 9:44 pm

If there are enough, I'll throw down
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Angled valve stems

Postby Thomas » Wed Jan 25, 2012 9:46 pm

I already got two sets last year. 8)
Ride, Race, Live.
ASMA #45
2002 HayaBusa (aka "Bus"), 2006 GSXR-1000 (aka "Little Bus"), 2000 Kawi Ninja 250 (aka "Baby Bus")
Sponsors: RPM Motorcycle, Kustom Works, Lockhart Phillips USA
User avatar
Thomas
ASMA Racer
 
Posts: 207
Joined: Thu Dec 23, 2010 11:12 pm
Location: El Paso, TX

Re: Angled valve stems

Postby speedracer170 » Wed Jan 25, 2012 10:57 pm

im down for a set
Cody
09 GSXR 600
AM 825
User avatar
speedracer170
Racer
 
Posts: 253
Joined: Wed Jan 05, 2011 7:08 pm
Location: Holloman

Re: Angled valve stems

Postby sweetr6 » Wed Feb 01, 2012 12:06 am

nobody else, CHEAP BASTARDS!!!!!!!!
sweetr6
Crew Chief
 
Posts: 142
Joined: Fri Dec 24, 2010 10:44 pm
Location: Hell Pisshole Tx.

Re: Angled valve stems

Postby findgold » Wed Feb 01, 2012 1:19 am

sweetr6 wrote:nobody else, CHEAP BASTARDS!!!!!!!!

I will go for two sets.. :alien: I don't know how I missed you post the first time.. These will be nice on the little rear ninjette wheel.
Dirt is for worms - Asphalt is for Racing
And almost anyone can go fast with too MUCH Horsepower!
User avatar
findgold
Racer
 
Posts: 331
Joined: Fri Dec 24, 2010 3:05 pm
Location: Belen, NM

Re: Angled valve stems

Postby blendedfamily » Wed Feb 01, 2012 6:41 am

4 more....
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Angled valve stems

Postby mesches » Wed Feb 01, 2012 8:32 am

I'll take 2
mesches
Crew Chief
 
Posts: 156
Joined: Tue Dec 28, 2010 8:57 am

Re: Angled valve stems

Postby Thomas » Thu Feb 02, 2012 7:40 am

Having these valve stems makes checking hot tire pressure so much easier. You don't have to get rotor burns trying to check the front pressure. These should be on your must have list. 8) Just my .02
Ride, Race, Live.
ASMA #45
2002 HayaBusa (aka "Bus"), 2006 GSXR-1000 (aka "Little Bus"), 2000 Kawi Ninja 250 (aka "Baby Bus")
Sponsors: RPM Motorcycle, Kustom Works, Lockhart Phillips USA
User avatar
Thomas
ASMA Racer
 
Posts: 207
Joined: Thu Dec 23, 2010 11:12 pm
Location: El Paso, TX

Re: Angled valve stems

Postby Super Mario » Thu Feb 02, 2012 9:26 am

I already have some, but I'll take two sets..
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Angled valve stems

Postby blendedfamily » Thu Feb 02, 2012 9:52 am

I think that's 10....
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Angled valve stems

Postby sweetr6 » Thu Feb 02, 2012 10:59 pm

last chance, ordering tomorrow.
me: 2 sets
cody: 1 set
loren: 2 sets
ben: 2 sets
tony: 4 sets or 5????
mario: 2 sets
sweetr6
Crew Chief
 
Posts: 142
Joined: Fri Dec 24, 2010 10:44 pm
Location: Hell Pisshole Tx.

Re: Angled valve stems

Postby fwrider94 » Fri Feb 03, 2012 6:50 am

I'll take 1 set.
If it doesn't have wheels, it's not a sport. It's just a game.
fwrider94
Instructor
 
Posts: 43
Joined: Mon Dec 27, 2010 6:58 am
Location: Alamogordo, New Mexico

Re: Angled valve stems

Postby blendedfamily » Fri Feb 03, 2012 9:01 am

1 set, assface.
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Angled valve stems

Postby mesches » Fri Feb 03, 2012 9:41 am

I think he interpreted your "4 more..." post as you saying you wanted 4 more sets.

Calm down, crip.
mesches
Crew Chief
 
Posts: 156
Joined: Tue Dec 28, 2010 8:57 am

Re: Angled valve stems

Postby Thunderdawg » Fri Feb 03, 2012 1:55 pm

Never ever interpret what Tony says. He'll have you bent over and plugged in quicker than you can shake your tail feathers at him.
User avatar
Thunderdawg
Pit Crew
 
Posts: 57
Joined: Sat Dec 25, 2010 11:48 am

Re: Angled valve stems

Postby Super Mario » Fri Feb 03, 2012 3:50 pm

LMAO.....
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Angled valve stems

Postby sweetr6 » Sat Feb 04, 2012 10:58 pm

Dude sold out but said he will be getting more in about a week and will get back to me then. So if anyone else wants to order, you still have time.
sweetr6
Crew Chief
 
Posts: 142
Joined: Fri Dec 24, 2010 10:44 pm
Location: Hell Pisshole Tx.

Re: Angled valve stems

Postby mr_gixxxer1k » Sun Feb 05, 2012 1:38 am

i will take a set!
#63 Perk
User avatar
mr_gixxxer1k
Racer
 
Posts: 218
Joined: Tue Mar 29, 2011 12:06 pm
Location: tucson

Re: Angled valve stems

Postby HeavyHustler » Sun Feb 05, 2012 10:54 pm

I'll take 1 set of black!
Cheers,
Mark
User avatar
HeavyHustler
Pit Crew
 
Posts: 59
Joined: Mon Feb 14, 2011 10:51 pm
Location: Phoenix

Next

Return to Non Race Related

Who is online

Users browsing this forum: No registered users and 1 guest

cron