ASMA Round 1 , March 9th and 10th 2013.

For everything related to the ASMA Championship Series.

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby Roger@Arroyo » Thu Mar 07, 2013 1:22 pm

Timing system and all of our transponders, plus two timing computers checked and working.
PA system checked from the start/finish to the tower checked and working.
Tires are here.
Brake Pads are here.
All signup and contingency forms are printed and ready.
ASMA bike stickers are cut and ready.
ASMA trailer and window stickers are back in stock.
Tires are already mounted on my spare wheels to put the Cuban into the weeds.
Trash cans in the pits are emptied and ready, office and signup areas are ready.
Fence is open at every other space for the pits.
New brake markers are in place.

Still to do:
1. Cut the tops off a couple more barrels for more trash cans along the drag strip and the tire pit area.
2. Build the glory hole for Sergio, maybe even give him a chair this time.
3. Do a little more fiberglass work on Mickey's GSXR bodywork to get him through the weekend.
4. Replace my fork seals if I get time. Honestly, I can make it through the weekend as is, but would like to get it done.
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby blendedfamily » Thu Mar 07, 2013 2:55 pm

5. Host car wash for Tony's gas fund.
6. Raffle off tickets for a free paint job for Tony's beer fund.
7. Smoke.
8. Sleep.
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby Roger@Arroyo » Thu Mar 07, 2013 2:59 pm

blendedfamily wrote:5. Host car wash for Tony's gas fund.
6. Raffle off tickets for a free paint job for Tony's beer fund.
7. Smoke.
8. Sleep.


5. That's what Sergio's glory hole is for
6. Tony doesn't drink beer, but when he does, it's Keystone
7. What?
8. We don't need no stinkin sleep
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby ZF67 » Thu Mar 07, 2013 6:58 pm

Can we just host a bikini bike wash to raise money for tony??? I'm sure Loren and Jeff C. Would be willing to help
ZACK FOULK My Cheetah is dangerously cheeeesy
User avatar
ZF67
Rainbow Warrior
 
Posts: 141
Joined: Mon Mar 12, 2012 7:16 pm
Location: Urpantz

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby Roger@Arroyo » Thu Mar 07, 2013 10:30 pm

Um.....that's something that can't be unseen....
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby speedracer170 » Fri Mar 08, 2013 1:49 am

Gonna be a busy friday for me, get off work about 8am and have to finish up the trailer, wash the bike, load up the trailer and figure out where everything is gonna go in my new setup, go grocery shopping for the weekend (i.e. beer and lube), pack race gear, and try and find some sleep somewhere in there.

And have a final that is due monday :mrgreen:
Cody
09 GSXR 600
AM 825
User avatar
speedracer170
Racer
 
Posts: 253
Joined: Wed Jan 05, 2011 7:08 pm
Location: Holloman

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby Roger@Arroyo » Fri Mar 08, 2013 7:24 am

speedracer170 wrote:Gonna be a busy friday for me, get off work about 8am and have to finish up the trailer, wash the bike, load up the trailer and figure out where everything is gonna go in my new setup, go grocery shopping for the weekend (i.e. beer and lube), pack race gear, and try and find some sleep somewhere in there.

And have a final that is due monday :mrgreen:


Dang Amanda, you should have Cody help you with some of this stuff!
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby speedracer170 » Fri Mar 08, 2013 7:42 am

?
Cody
09 GSXR 600
AM 825
User avatar
speedracer170
Racer
 
Posts: 253
Joined: Wed Jan 05, 2011 7:08 pm
Location: Holloman

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby Roger@Arroyo » Fri Mar 08, 2013 11:38 am

Sorry, over your head :)
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby Roger@Arroyo » Fri Mar 08, 2013 12:44 pm

Bridgestone contingency is now available, the same great payout as last season.
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby EP_Shane_600 » Fri Mar 08, 2013 1:09 pm

Roger@Arroyo wrote:Bridgestone contingency is now available, the same great payout as last season.


Ill run them on Tony's bike
User avatar
EP_Shane_600
Racer
 
Posts: 326
Joined: Thu Dec 23, 2010 3:24 pm
Location: El Paso, Tx

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby blendedfamily » Fri Mar 08, 2013 3:36 pm

It might be for sale soon enough. No joyrides without cash in hand for now, gotta be careful. I'll lease it to ya though... ;)
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby EP_Shane_600 » Fri Mar 08, 2013 4:11 pm

blendedfamily wrote:It might be for sale soon enough. No joyrides without cash in hand for now, gotta be careful. I'll lease it to ya though... ;)

75 bucks per race weekend plus tires :-) and repair damages incase of a crash
User avatar
EP_Shane_600
Racer
 
Posts: 326
Joined: Thu Dec 23, 2010 3:24 pm
Location: El Paso, Tx

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby blendedfamily » Fri Mar 08, 2013 7:31 pm

What's my insurance for the crash damage?! You dont have the best reputation...
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: ASMA Round 1 , March 9th and 10th 2013.

Postby EP_Shane_600 » Fri Mar 08, 2013 8:26 pm

Lol... Id pay for the parts needed and do the repairs, and Roger would make some paint/fiberglass repair money :P
User avatar
EP_Shane_600
Racer
 
Posts: 326
Joined: Thu Dec 23, 2010 3:24 pm
Location: El Paso, Tx

Previous

Return to ASMA Championship Series

Who is online

Users browsing this forum: No registered users and 1 guest

cron