May Round Cometh

For everything related to the ASMA Championship Series.

May Round Cometh

Postby Lucky13 » Sun Apr 21, 2013 4:56 pm

Ready?
Last edited by Lucky13 on Tue Apr 30, 2013 4:49 am, edited 2 times in total.
4 Wheels move the body. 2 Wheels move the soul.
User avatar
Lucky13
Flaming Junk Inspector
 
Posts: 497
Joined: Fri Dec 24, 2010 8:44 pm
Location: Alamoghetto

Re: Round 3 commeth

Postby Super Mario » Mon Apr 22, 2013 4:32 pm

I'm crossing my fingers. Everything is ready..
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Round 3 commeth

Postby Lucky13 » Mon Apr 22, 2013 4:35 pm

Your rearsets are on the way. Should be here Friday or Saturday.
Last edited by Lucky13 on Mon Apr 22, 2013 6:55 pm, edited 1 time in total.
4 Wheels move the body. 2 Wheels move the soul.
User avatar
Lucky13
Flaming Junk Inspector
 
Posts: 497
Joined: Fri Dec 24, 2010 8:44 pm
Location: Alamoghetto

Re: Round 3 commeth

Postby Roger@Arroyo » Mon Apr 22, 2013 4:37 pm

Hopefully get the carbs tuned in on the Hawk this month, and a little geometry testing with the new spring on the GSXR.
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: Round 3 commeth

Postby tuscani451 » Mon Apr 22, 2013 4:52 pm

I got a bunch of "My Little Pony" stcikers on order.........










for Zack's bike :alien:

Seriously though, I was having a hard time getting the R6 in to neutral. It was recommended to me to have the clutch stack height checked, thoughts?
ASMA#451, Low and Slow
tuscani451
Crew Chief
 
Posts: 147
Joined: Thu Jun 16, 2011 6:35 pm

Re: Round 3 commeth

Postby kz2zx » Mon Apr 22, 2013 5:43 pm

tuscani451 wrote:I got a bunch of "My Little Pony" stcikers on order.........










for Zack's bike :alien:

My daughters can hook you up.

Seriously though, I was having a hard time getting the R6 in to neutral. It was recommended to me to have the clutch stack height checked, thoughts?

Did you have work done to it recently? An extra plate & fiber? Missing the ball bearing on the throwout?
ASMA 47
WERA 147
User avatar
kz2zx
ASMA Racer
 
Posts: 527
Joined: Wed Dec 22, 2010 5:39 pm
Location: Mesa, AZ

Re: Round 3 commeth

Postby tuscani451 » Mon Apr 22, 2013 5:58 pm

Nope have not messed with it at all. It shifted fine while riding
ASMA#451, Low and Slow
tuscani451
Crew Chief
 
Posts: 147
Joined: Thu Jun 16, 2011 6:35 pm

Re: Round 3 commeth

Postby Lucky13 » Mon Apr 22, 2013 6:54 pm

tuscani451 wrote:Nope have not messed with it at all. It shifted fine while riding

Can you get neutral with the motor off? That will be a tell if it's the clutch.
4 Wheels move the body. 2 Wheels move the soul.
User avatar
Lucky13
Flaming Junk Inspector
 
Posts: 497
Joined: Fri Dec 24, 2010 8:44 pm
Location: Alamoghetto

Re: Round 3 commeth

Postby Roger@Arroyo » Mon Apr 22, 2013 9:33 pm

More often than not, it's the shift rod adjustment.
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: Round 3 commeth

Postby blendedfamily » Tue Apr 23, 2013 7:36 am

Sell that piece of crap. It's going to blow up. I've seen it happen a few times before, but its rare. What ends up happening is the motor blows up, but it sends the clutch basket out the side case and it hits the frame, taking out a big chunk and making the bike useless. I'd unload the bike before this happens and buy yourself a much more reliable GSXR 1000...
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Round 3 commeth

Postby Roger@Arroyo » Tue Apr 23, 2013 7:56 am

blendedfamily wrote:Sell that piece of crap. It's going to blow up. I've seen it happen a few times before, but its rare. What ends up happening is the motor blows up, but it sends the clutch basket out the side case and it hits the frame, taking out a big chunk and making the bike useless. I'd unload the bike before this happens and buy yourself a much more reliable GSXR 1000...

:spam2:
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: Round 3 commeth

Postby Thunderdawg » Tue Apr 23, 2013 9:34 am

Is a two fiddy offer appropriate at this time?
User avatar
Thunderdawg
Pit Crew
 
Posts: 57
Joined: Sat Dec 25, 2010 11:48 am

Re: Round 3 commeth

Postby Roger@Arroyo » Tue Apr 23, 2013 10:03 am

And the Urban Express is rolling again. Had to do the first severe repair on it in 15 years. New tube and rear tire. :)
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Re: Round 3 commeth

Postby blendedfamily » Tue Apr 23, 2013 1:08 pm

^thank goodness. I was wondering what pit bike I was going to steal for the rest of the season..
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Round 3 commeth

Postby chefboyartie » Tue Apr 23, 2013 6:32 pm

Brand spanking new helicoil insert in two engine mounts. The bolt galled up and snapped when I went to replace the frame slider puck. I put an insert in the other mount for insurance purposes. I'll do a valve adjustment as well.
User avatar
chefboyartie
STFU, Art!
 
Posts: 372
Joined: Thu Dec 23, 2010 5:05 pm

Re: Round 3 commeth

Postby Xstrom » Tue Apr 23, 2013 6:49 pm

What's going on with Team Races? Jason brown and I challenge anyone that wants some. We'll be on a stock 08 cbr600rr and by stock I mean headlights and license plate. This invite goes out to everyone.
am #74
User avatar
Xstrom
Wheel Changer
 
Posts: 18
Joined: Thu Jun 21, 2012 5:57 pm

Re: Round 3 commeth

Postby Super Mario » Tue Apr 23, 2013 7:37 pm

Hey Roger, do you want to team up on the R6 or the Hawk ?
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Round 3 commeth

Postby blendedfamily » Tue Apr 23, 2013 7:46 pm

Jeff, are you planning on turning it into a race bike?
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Round 3 commeth

Postby Xstrom » Tue Apr 23, 2013 9:10 pm

Just what needs to be done, tie offs, ect.
am #74
User avatar
Xstrom
Wheel Changer
 
Posts: 18
Joined: Thu Jun 21, 2012 5:57 pm

Re: Round 3 commeth

Postby Roger@Arroyo » Tue Apr 23, 2013 9:42 pm

Team Sprints is going to be an occasional thing for now. Lets shoot for June. We HAVE to have 8 teams, prepaid to make it happen on Saturdays. Sundays is easy for us but nobody wants to stay if we make it the last race, and nobody wants people to ride their bikes on Sunday morning......

Basically insurance costs have gone up and the extra price of races on Saturday over the trackday price....we need 8 teams. We'll still lose money on it but not as much and we're okay with that. But losing money for 3 teams doesn't make sense.
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1013
Joined: Thu Dec 23, 2010 7:25 am

Next

Return to ASMA Championship Series

Who is online

Users browsing this forum: No registered users and 1 guest

cron