Round 2 coming quick!

For everything related to the ASMA Championship Series.

Round 2 coming quick!

Postby EP_Shane_600 » Wed Mar 27, 2013 7:25 am

18 days ladies. Hope to have an even better turn out than round 1 and we can def go for better weather!
User avatar
EP_Shane_600
Racer
 
Posts: 326
Joined: Thu Dec 23, 2010 3:24 pm
Location: El Paso, Tx

Re: Round 2 coming quick!

Postby Super Mario » Wed Mar 27, 2013 3:45 pm

Yes, a better Round 2 all around would be awesome.
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Round 2 coming quick!

Postby blendedfamily » Wed Mar 27, 2013 3:59 pm

start pitching into a hat for gas money bitches. If you want to see my bright shiny face, (which I know you do), I'll need at last 200 bucks for gas, food, hotel, and a 30 pack of decent beer.
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Round 2 coming quick!

Postby Super Mario » Wed Mar 27, 2013 4:28 pm

If you'll except a IOU, I got your back Tony..
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Round 2 coming quick!

Postby chefboyartie » Wed Mar 27, 2013 5:04 pm

Tony I have floor space you can rent out pretty cheap. You can cuddle with my dog. He'll make you his bitch.
User avatar
chefboyartie
STFU, Art!
 
Posts: 374
Joined: Thu Dec 23, 2010 5:05 pm

Re: Round 2 coming quick!

Postby chefboyartie » Wed Mar 27, 2013 5:06 pm

Which in turn makes you my bitch!
User avatar
chefboyartie
STFU, Art!
 
Posts: 374
Joined: Thu Dec 23, 2010 5:05 pm

Re: Round 2 coming quick!

Postby EP_Shane_600 » Wed Mar 27, 2013 6:30 pm

chefboyartie wrote:Which in turn makes you my bitch!



He is already Rocko's bitch. Tony knows the computer room is open for him
User avatar
EP_Shane_600
Racer
 
Posts: 326
Joined: Thu Dec 23, 2010 3:24 pm
Location: El Paso, Tx

Re: Round 2 coming quick!

Postby Lucky13 » Sat Mar 30, 2013 8:57 am

EP_Shane_600 wrote:
chefboyartie wrote:Which in turn makes you my bitch!



He is already Rocko's bitch. Tony knows the computer room is open for him

I'm calling dibs, unless you like the sound of my snore.
4 Wheels move the body. 2 Wheels move the soul.
User avatar
Lucky13
Flaming Junk Inspector
 
Posts: 497
Joined: Fri Dec 24, 2010 8:44 pm
Location: Alamoghetto

Re: Round 2 coming quick!

Postby Super Mario » Mon Apr 08, 2013 10:15 pm

4 days to go until Round 2. Roll call, who's showing up ?
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Round 2 coming quick!

Postby Roger@Arroyo » Mon Apr 08, 2013 10:35 pm

me :)
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1014
Joined: Thu Dec 23, 2010 7:25 am

Re: Round 2 coming quick!

Postby speedracer170 » Tue Apr 09, 2013 12:21 am

Me unless something major changes
Cody
09 GSXR 600
AM 825
User avatar
speedracer170
Racer
 
Posts: 253
Joined: Wed Jan 05, 2011 7:08 pm
Location: Holloman

Re: Round 2 coming quick!

Postby c-bass » Tue Apr 09, 2013 12:24 pm

i spose i try and make it :roll:
User avatar
c-bass
Pit Crew
 
Posts: 70
Joined: Mon Dec 27, 2010 3:19 pm

Re: Round 2 coming quick!

Postby Roger@Arroyo » Tue Apr 09, 2013 7:19 pm

I spent 8 hours working on the Hawk today.
1. Got the intake manifolds ported to the carbs and heads.
2. Looked everywhere and finally found some hose clamps that fit the new intake manifolds.
3. Put on the new throttle and cables. They were NOT plug and play. :(
3. Got the right side Woodcraft rearset mounted. They don't sell a full kit for the Hawk, only the basic with no petals. What was mounted before was the original's from my GSXR1000 with adapter plates I had made, including the master cylinder. None of it fit the new rearsets. Had to find and mount the original Hawk master cylinder, but the custom exhaust is in the way of the Hawk rear brake pedal, by about an inch and a half. Absolutely no way to make it work, besides, it's a steel pedal. My way of fixing the problem was to take a stock GSXR footpeg and cut it at the shaft where the Suzuki brake pedal mounts, about an inch long. Then drill a bigger hole in the rearset and bolt the shaft to the backside. Then put a dent in the can for clearance. Then bend the stock Suzuki pedal into an S because stock it mounts on the outside of the rearset and I had to mount it on the inside. Looks good too!

Still have to get some new fuel line as the FCR's have a bigger inlet tube than the stock carbs. Also a new T to split the hose to get to both carbs. Then still have to weld the tank and put some Kreem in it. And, mount the left side rearset, but that should be easier because I was already using the stock shifter pedal.
MO is my bitch
User avatar
Roger@Arroyo
Site Admin
 
Posts: 1014
Joined: Thu Dec 23, 2010 7:25 am

Re: Round 2 coming quick!

Postby blendedfamily » Tue Apr 09, 2013 8:15 pm

then I can crash it and undo everything!
User avatar
blendedfamily
Troy McClure
 
Posts: 974
Joined: Thu Dec 23, 2010 6:37 pm

Re: Round 2 coming quick!

Postby Thunderdawg » Wed Apr 10, 2013 7:23 am

Between the drilling and putting the shaft to the backside, I figured Tony to be so excited he would just gush himself when you stated kreeming the tank. No, he just wants to crash and bash. :shock: Does this mean your running F40 and going to spank all the Old Guys?????
User avatar
Thunderdawg
Pit Crew
 
Posts: 57
Joined: Sat Dec 25, 2010 11:48 am

Re: Round 2 coming quick!

Postby chefboyartie » Wed Apr 10, 2013 5:32 pm

Spank the old guys? Now you're gushing yourself.
User avatar
chefboyartie
STFU, Art!
 
Posts: 374
Joined: Thu Dec 23, 2010 5:05 pm

Re: Round 2 coming quick!

Postby Super Mario » Wed Apr 10, 2013 9:29 pm

I can't wait to put Roger in the weeds outside of turn one..
ASMA # 34
Super Mario
Racer
 
Posts: 345
Joined: Thu Dec 23, 2010 8:13 pm

Re: Round 2 coming quick!

Postby ZF67 » Wed Apr 10, 2013 10:07 pm

bwahahaah and so the weed starts again in 2013^......i just wanna see roger woop up on greg in the twin class
ZACK FOULK My Cheetah is dangerously cheeeesy
User avatar
ZF67
Rainbow Warrior
 
Posts: 141
Joined: Mon Mar 12, 2012 7:16 pm
Location: Urpantz

Re: Round 2 coming quick!

Postby Jeremy » Thu Apr 11, 2013 6:32 pm

Ccw this weekend?
Jeremy
Crew Chief
 
Posts: 135
Joined: Sun Dec 25, 2011 10:42 pm

Re: Round 2 coming quick!

Postby EP_Shane_600 » Thu Apr 11, 2013 7:03 pm

Jeremy wrote:Ccw this weekend?



Yup
User avatar
EP_Shane_600
Racer
 
Posts: 326
Joined: Thu Dec 23, 2010 3:24 pm
Location: El Paso, Tx

Next

Return to ASMA Championship Series

Who is online

Users browsing this forum: No registered users and 0 guests